Photo by Danijela Maksimovic/Shutterstock.com

Dealing with ripening and ethylene

Ethylene is a gaseous compound also called the “ripening hormone”. It is present in the air in an extremely low concentration, often not even detectable. Yet this gaseous molecule is very important for the ripening of many fruits. Most fruits produce ethylene to start the ripening process. The effect of ethylene can be seen as positive if it leads to ripe and tasty products. Sometimes ethylene is even artificially added to regulate ripening. However, in many cases the presence of ethylene is undesirable. It limits the storage time if the fruit ripens too quickly and becomes overripe. This applies to products such as apple, apricot, avocado, kiwi, melon, papaya, pear, peach, plum and tomato.

Ethylene is the ripening hormone. Photo by WUR
Ethylene is the ripening hormone. Photo by WUR

Ethylene and ripening

Ripening is the process by which fruits become attractive with changes in flavour, colour and texture. This is a desirable process for many fruits, making them visually appealing and flavourful. However, ripening can also be seen as quality loss. The importance of ethylene in ripening is most evident from its stimulating effects on respiration, ethylene production, softening and coloration. The ethylene effect on ripening can depend on the commodity, temperature, ethylene concentration and exposure time. Controlling ethylene can be critical during postharvest storage as ethylene can decrease storage potential, shelf life, and increase susceptibility to pathogens.
Strawberries are producing little ethylene. Photo by WUR.
Strawberries are producing little ethylene. Photo by WUR.

Ethylene production by fruit

Horticultural products can be classified according to their ethylene production. Ethylene production varies between different types of products. There is no direct link between a product's ethylene production capacity and its shelf life. Strawberries, for example, have a low ethylene production, but also a short shelf life, while apples (depending on the variety) usually have a high ethylene production and can be stored for a long time. Look here for a table with a list of products and an estimate of the extent of ethylene production.

Kiwi is an example of an ethylene sensitive fruit. Photo by WUR.
Kiwi is an example of an ethylene sensitive fruit. Photo by WUR.

Ethylene sensitivity of fruit

If ethylene-sensitive products are exposed to ethylene, this can have disastrous effects. Ethylene can be physiologically active in very small amounts, even below 0.00001% (=0.1 ppm or 100 ppb. The ethylene effect not only depends on the concentration, but also on the exposure time and temperature.

Ethylene production and ethylene sensitivity are not always related. Products that do not produce large amounts of ethylene themselves can be sensitive to ethylene and therefore be affected by external sources of ethylene. An example is unripe kiwi. Look here for a table with a list of products and an estimate of the degree of ethylene sensitivity.
It is important to monitor ethylene concentrations in storage rooms where ethylene sensitive products are being stored. Photo by WUR.
It is important to monitor ethylene concentrations in storage rooms where ethylene sensitive products are being stored. Photo by WUR.

Ethylene during storage

The extent to which ethylene is produced depends on the temperature: less ethylene is produced at low temperatures. However, ethylene is still produced during storage at low temperatures. This can accumulate in the cold stores. The effects of ethylene on fruit quality are usually small at low temperatures. But for fresh produce that is sensitive to ethylene ripening, it is important to minimise ethylene levels in the storage areas to limit unwanted ripening and aging. There are several techniques for removing ethylene from storage areas.

Reducing the ethylene effect in practice

  1. Example of ventilation on the outside of a cold store, a developed way to remove ethylene in rooms. Photo by WUR.
    Example of ventilation on the outside of a cold store, a developed way to remove ethylene in rooms. Photo by WUR.

    Examples of practical solutions

    Practical solutions to reduce negative ethylene effects focus on reducing ethylene production, reducing ethylene sensitivity and reducing airborne ethylene levels. The most commonly used strategies to reduce negative ethylene effects are:

    • cooling,
    • reducing oxygen content/increasing CO2% by applying Controlled Atmosphere (CA) or Modified Atmosphere (MA) packaging
    • ventilation with low-ethylene air preventing ethylene production from outside sources,
    • using ethylene removers or converters (scrubbers), for example based on potassium permanganate (KMnO4) as used in packaging or reefer containers
    • applying ethylene inhibitors, e.g. 1-MCP
  2. Controlled atmosphere (CA) conditions can be hazardous to humans. Pay close attention to the alarm system and always follow the safety measures. Photo by WUR
    Controlled atmosphere (CA) conditions can be hazardous to humans. Pay close attention to the alarm system and always follow the safety measures. Photo by WUR

    Application of low oxygen and carbondioxide

    The application of low oxygen (O2) and high carbon dioxide (CO2) is used for various types of fruit and vegetables in controlled atmosphere (CA) storage and modified atmosphere (MA) packaging in order to extend shelf life and maintain quality. Low O2 and high CO2 can reduce ethylene production and sensitivity. O2 is a substrate for the production of ethylene, so a lower O2 content leads to less ethylene production. High CO2 also prevents ethylene production, although this effect is often smaller.
  3. Research shows the effect of whether or not to use ethylene inhibitors. Photo by WUR
    Research shows the effect of whether or not to use ethylene inhibitors. Photo by WUR

    Ethylene inhibitors

    The prevention or inhibition of ethylene activity can be achieved by using 1-methylcyclopropene (1-MCP). This volatile organic compound works by blocking ethylene receptors in the fruit. As a result, it prevents the ripening of ethylene-sensitive fruit. 1-MCP is registered for field use in many countries, and is widely used commercially as a gas application mainly on apples and pears. It is also very effective on products such as banana and plum. With the correct use of 1-MCP, various quality benefits can be achieved, such as better retention of firmness during storage and in the supermarket, better retention of basic color and less chance of storage defects. Ethylene blockers are sometimes also applied before harvest. Sometimes these fruits receive an ethylene treatment upon arrival at the export destination to ripen evenly. For flowers, STS (silver thiosulphate) is used as an ethylene blocker. This is absorbed by the flowers through the water.
A gas mixture of ethylene and nitrogen. Photo by WUR.
A gas mixture of ethylene and nitrogen. Photo by WUR.

Ripening programs and ready-to-eat concepts

In some cases, it is desirable to artificially initiate fruit ripening. Ethylene gas can be used on climacteric fruits to stimulate the production of ethylene by the fruit itself. The best example of this is the banana ripening room, where ethylene is used to start the ripening process of green imported bananas. Such ripening programs, often a combination of ethylene and higher temperature, are also used for ripening avocado and mango. Ethylene gas can also be used to degreen citrus fruits, for example. In such a case, the breakdown of chlorophyll is accelerated, while the ripening process itself is not affected. The aim is to offer the consumer a more uniform and attractive product. Sometimes this is also specifically marketed as "Ready-to-Eat".
A gas-powered forklift truck emits ethylene. Photo by WUR.
A gas-powered forklift truck emits ethylene. Photo by WUR.

p

Ethylene sources and detection

Ethylene sources can be surprising because they are not always from plant products. It can also be released during the combustion of petroleum products (think of a non-electric, gas-powered forklift truck operating in the storage facility, or diesel engines of trucks that load/unload). It is important to measure the ethylene concentration of the air when using equipment that burns gasoline, as using it can increase the ethylene concentration to levels that affect the fresh product.
Measuring the ethylene concentration is strongly recommended. Ventilate if necessary. The advice for distribution centers is usually to stay below 500 ppb. There are several ethylene detectors on the market.

Measuring ethylene during transport

Unfortunately, your cookie settings do not allow the social media element to be displayed. check your settings.

Ripening mechanisms of fruit

  1. Examples of climacteric and non-climacteric fruit. Photo by WUR.
    Examples of climacteric and non-climacteric fruit. Photo by WUR.

    Classification of fruits based on ripening mechanisms

    Fruits can be divided into two groups based on the ripening mechanism: climacteric and non-climacteric fruits.

    Climacteric fruits continue to ripen after harvest. They show a peak in ethylene production during maturation, which is often accompanied by a peak in respiration. The sharp increase in climacteric ethylene production early in maturation is the beginning of change in color, aroma, texture, taste and other attributes. Examples of climacteric fruits are apple, avocado, banana, pear and tomato.

    Ripening of non-climacteric fruits is often considered an ethylene-independent process. In non-climacteric fruits, respiration does not show a major change upon ripening and ethylene production remains at a low level. Examples are blueberries, cherry, grape and strawberry.
  2. Ethylene production during maturation is a chain reaction. Photo by Shawn Hempel/Shutterstock.com
    Ethylene production during maturation is a chain reaction. Photo by Shawn Hempel/Shutterstock.com

    Preclimacteric and climacteric phase

    In climacteric fruits, ethylene can prevent or stimulate its own production, depending on the stage of development of the fruit.

    In the first phase there is a low base production of ethylene. This phase is associated with terms such as preclimacteric phase, immature, negative feedback regulation and system 1 ethylene.

    In the next stage, maturation, there is a high level of ethylene production. This large amount of ethylene is caused by self-stimulating ethylene production. This means that the presence of ethylene stimulates more ethylene production, a kind of chain reaction. This phase is associated with terms such as climacteric phase, maturation, positive feedback regulation and system 2 ethylene.
  3. Ethylene ripening rooms. Photo by ASP-media/Shutterstock.com
    Ethylene ripening rooms. Photo by ASP-media/Shutterstock.com

    Starting the climacteric phase

    When climacteric fruit has reached a certain level of maturity, its ethylene production increases and the fruit begins to ripen. The start of the climacteric phase can be accelerated by harvesting the fruit (as with apples). Sometimes the fruit needs a cold period (storage) before the climacteric phase starts (for example in some pear varieties). For fruits such as avocado and banana, an external application of ethylene is used postharvest to initiate ripening or to achieve more uniform ripening in the batch